Hillrom Compella Скачать руководство пользователя страница 85

Страница: 85 / 116

Accessories

Compella™ Bariatric Bed System Instructions for Use (178951 REV 6)

CCESSORIES

FOR

ORTH

MERICA

IV Pole (P2217)

WARNING:

To help prevent personal injury and/or equipment
damage, follow these warnings and cautions:

•

Warning

—Do not exceed the 11 kg (25 lb) load

capacity of the IV pole.

•

Warning

—Correctly attach the IV pole;

otherwise, it may fall.

•

Warning

—Uneven loading of the IV pole could

cause the contents to fall.

•

Warning

—When you lower the upper section of

an IV pole, always hold the upper section of the
pole before you pull the release knob.

•

Warning

—Install the IV pole in an equipment socket only. See “Equipment Sockets” on page

32.

The IV pole is a removable, telescopic pole that installs in any of the equipment sockets.

To Install

Insert the IV pole vertically into any of the equipment sockets at either the head end or foot end of the
bed.

To Remove

Pull the IV pole out from the equipment socket.

Oxygen Tank Holder, Vertical (P27601)

WARNING:

Warning

—Failure to correctly attach the oxygen tank holder could cause it to drop. Injury and/or

equipment damage could occur.

The oxygen tank holder holds one

size oxygen tank with a regulator. The mount location lets the

affixed oxygen tank holder pivot. The safe working load of the oxygen tank holder is 14 kg (30 lb).

To Install

Install the mounting bar vertically into any of the equipment sockets at either the head end or foot
end of the bed.

Put the oxygen tank in the oxygen tank holder.

Tighten the holder thumbscrew to keep the oxygen tank in position.

NOTE:

Make sure that when you put an oxygen tank in the holder that the tank does not interfere with the
head section articulation.

To Remove

Loosen the thumbscrew that holds the oxygen tank tight in the oxygen tank holder.

Содержание Compella





















































































































Результаты поиска

Содержание Compella

Отзывы:

Бренды по названию

Популярные бренды

Hillrom Compella, Инструкция по эксплуатации

Результаты поиска

Содержание Compella

Отзывы:

Бренды по названию

Популярные бренды