manualshive.com logo in svg

Hillrom Compella, Инструкция по эксплуатации

Поделиться
Скачать
Hillrom Compella Скачать руководство пользователя страница 68

Surface Features and Controls

54

Compella™ Bariatric Bed System Instructions for Use (178951 REV 6)

To Activate

Press a 

Nurse Call

 control. When the nurses’ station acknowledges the call, these will occur:

•

The Nurse Call indicator on the caregiver control panel will come on.

•

The Voice indicator on the patient pendant will come on. The nurses’ station is 
ready for you to speak. 

•

When the call is acknowledged, the Nurse Call indicator on the patient pendant 
is amber. The Nurse Call indicator on the caregiver control panel is off.

NOTE:

If the Voice indicator or Nurse Call indicator on the patient pendant is flashing, the Nurse 
Call has not yet been acknowledged.

When the Listening indicator comes on, the nurses’ station is speaking.

NOTE:

The Nurse Call controls are always active and their indicators are green when a Nurse 
Call has not been initiated. The Nurse Call controls can not be locked out.

SURFACE FEATURES AND CONTROLS

S

AFETY

 I

NFORMATION

WARNING:

Obey all warnings and cautions throughout the manual and also the safety information below to help 
prevent injury and/or equipment damage:

General

•

Warning

—Use of the therapy surface and air supply unit with a bed frame other than the 

Compella™ Bariatric Bed could substantially reduce the effectiveness of the safety features 
incorporated into the system. 

•

Warning

—Evaluate patients for entrapment risk according to facility protocol, and monitor 

patients appropriately. 

•

Warning

—Children, pets, and pests may damage the device and may cause bodily harm to 

themselves and/or the patient. 

•

Warning

—The system is design and intended to be used with a specific Compella™ Bariatric 

Bed frame. 

Содержание Compella





















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды