HIKVISION Hik IP Receiver Pro, Руководство пользователя, Страница: 28 / 57

Make sure you have added the security control panels and configured protocol parameters. For
more details, refer to Device Management and Configure Protocol Parameters .
Click Configuration → System → Alarm Monitor to enter alarm monitor setting page. Check
Enable and click Save to enable alarm monitor function.
●
Get URL: By default, a URL is displayed on this page. You can copy the URL to access the Web
page or send it to other users for checking alarms.
●
Change URL: Click to generate a new URL automatically, so that the previous URL is inactive.
●
Check Alarms: Edit the device's account ID in URL and enter the edited URL in address bar to
enter the Web page. You can check alarms details (e.g., protocol type, event name, event code,
time, and account ID), view picture, play video, download picture or video, etc.
●
Click Refresh to get the latest alarms if you changed the protocol.
●
Click in the Two-Way Audio column to start two-way audio.
Note
○
A plug-in is required for starting two-way audio.
○
The two-way audio function is only supported by Chrome, Firefox, and Microsoft Edge.
○
You can configure device settings to determine how much time is allowed for starting two-way
audio after an alarm is triggered. You can configure it on the Configuration page of that device.
○
Make sure that you have installed audio input and output devices on your PC.
○
If is not available, you can click Synchronize Device Information on the Device page.
Example
If the URL is http://10.10.10.1:8080/page/videoReview?
token=DXXXXXXXXXXXXXXXXX3C&account=<ID>, and the device's account ID is 1234, you need to
enter http://10.10.10.1:8080/page/videoReview?
token=DXXXXXXXXXXXXXXXXX3C&account=1234 in the address bar to enter the Web page for
checking alarms.
Figure 4-2 Check Alarms
Hik IP Receiver Pro User Manual
23