HIKVISION Hik IP Receiver Pro, Руководство пользователя, Страница: 11 / 57

Chapter 3 Device Management
The Hik IP Receiver Pro can manage multiple device types, e.g. network camera, DVR, NVR, and AX
Pro security control panel. After adding devices to the Hik IP Receiver Pro and configuring alarm
service and zone, the Hik IP Receiver Pro can transmit alarms and images/videos from these
devices to ARC.
Figure 3-1 Device List
Add Device
You can add Hikvision devices managed in the Hik-ProConnect to the Hik IP Receiver Pro, add
security control panels by ISUP5.0 protocol, and add third-party devices to the Hik IP Receiver Pro.
Connection Mode
ISUP
If the device only supports direct connection, the connection mode will be displayed as ISUP.
Dual-Connection
If the device added by Hik-ProConnect supports direct connection, the connection mode will
be displayed as Dual-Connection. In this mode, Hik IP Receiver Pro receives alarms by
ISUP5.0 protocol in priority, and the Supervision of online device will be displayed as
Online(ISUP). If an exception occurs when receiving alarm by ISUP5.0 protocol, Hik IP
Receiver Pro receives alarms through Hik-ProConnect, and the Supervision of online device
will be displayed as or Online(HPC).
Online(ISUP)
The device is connected to the Hik IP Receiver Pro by direct connection.
Online(HPC)
The device is connected to the Hik IP Receiver Pro by Hik-ProConnect.
HPC
If the device added by Hik-ProConnect does not support direct connection, the connection
mode will be displayed as HPC.
Enable Receiving Alarm and Set Zone
After adding devices to the Hik IP Receiver Pro, you can enable alarm service and add zone for
these devices, and then link channels to zones to transmit videos from linked channels to ARC.
Hik IP Receiver Pro User Manual
6