HIKVISION Hik IP Receiver Pro, Руководство пользователя, Страница: 34 / 57

2. Enter sender name, sender email, server address, and port No.
Note
●
For sender name, up to 32 characters are allowed.
●
The sender email should support SMTP service. Only gamil, hotmail, and yahoo are supported.
●
The server address and port No. are those of the sender email.
3. Select an encryption type.
4. Enter the sending interval of events.
Note
Sending interval means Hik IP Receiver Pro will send emails at regular intervals. For example, if
the interval is 30 minutes, the Hik IP Receiver Pro will send emails every 30 minutes. The sending
interval is 3 minutes by default. The sending interval is only used for the events whose
notification emails can be sent at regular intervals. If an event of the same device occurs more
than once during an interval, the email will only display the information of the event triggered at
the first time.
5. Optional: Check Enable Authentication, and enter user name and authorization code.
Note
●
The user name is the same as that of the sender email, and it should contain no more than 32
characters.
●
Before authentication, the SMTP service of the sender email should be enabled. The
authorization code is used for Hik IP Receiver Pro to send emails via the sender email. It can
be the password of the sender email or the authorization code provided by the sender email.
The specific authorization code is dependent on the sender email system.
●
The email might not be sent to the receiver(s) successfully without authentication.
6. Enter receiver information in the Receiver table.
Note
●
For receiver name, up to 32 characters are allowed.
●
Up to 5 receivers are allowed.
7. Click Test to test whether the receiver email can receive the test email.
8. Click Save.
Hik IP Receiver Pro User Manual
29