User Manual of Mobile Digital Video Recorder
50
6.
Click the
Set
button of
Display Channel
, check the checkboxes of display channels, and click
OK
to go back to upper
menu. Then the device positioning information will be displayed on the selected channels.
7.
Click
OK
to save the new settings and exit.
You can view the device positioning status on the Positioning Status interface (Menu > Status > Position).
10.3
Configuring G-Sensor Alarm
Purpose:
G-Sensor detects and records the acceleration speed information in 3-axial (X, Y, Z) directions.
Before you start:
Connect an external sensor to the device for obtaining and providing the acceleration speed in 3-axial directions.
Steps:
1.
Enter the G-Sensor Settings interface.
Menu > Basic Settings > G-Sensor
Figure 10. 4
G-Sensor Settings
2.
Select the mode of G-sensor
Module
. 2 modes of G-sensor module are selectable.
RS-232
: The G-sensor is connected to the mobile DVR through RS232 interface.
Built-in:
The G-sensor is built in the mobile DVR
3.
Set the limit value for acceleration alarm in X, Y and Z directions.
X, Y and Z represent the direction of acceleration and the unit of alarm value is G (G=9.8 m/s
2
).
4.
Set the linkage actions for acceleration alarm, including
Audible Warning
and
Alarm Output
. For details of alarm
output settings, see
11.2.2 Configuring Alarm Output
5.
Click
OK
to save the new settings and exit.
You can view the G-sensor status on the G-sensor Status interface (Menu > Status > G-sensor).
10.4
Configuring Sensor-in
Purpose:
Sensor-in detects and records the driving information of the vehicle, including pedal braking, turning left/right, reversing,
etc.
