User Manual of Mobile Digital Video Recorder
42
Chapter 7
Wireless Network Settings
7.1
Dialing Settings
Before you start:
Install a 3G/4G SIM card on the device.
Dialing function is only supported by DS-MP7508/GW, DS-MP7508/GW/WI, and DS-MP7508/GLF/WI series.
Steps:
1.
Enter the 3G/4G Dialing Settings interface.
Menu > Basic Settings > Dial
Figure 7. 1
Dialing Settings
2.
Check the checkbox of
Enable Dialing
to enable the dialing function of the device.
3.
Select
Network Mode
as
Auto
,
Auto-Search and Auto-Switch
, or
3G
Only
in the dropdown list.
Auto
: the work mode is set as the detected stronger signal.
Auto-Search and Auto-Switch:
As long as 3G signal is detected, even if it is weak, the work mode is 3G mode.
3G Only
: the network mode is set as 3G mode, that is 2G mode is not available.
4G Only
: the network mode is set as 4G mode, that is 3G mode is not available.
4.
To configure the VPDN (Virtual Private Dialup Network) settings, you can click the
Set
button of
More Settings
, input
the access point name (APN), dialing number, username and password, select the authentication type, and then click
OK
to save the settings.
Please contact the local operator and consult the network parameters of the VPDN.
