User Manual of Mobile Digital Video Recorder
32
Figure 3. 2
Record Settings
2.
Select the camera from the drop-down list.
3.
Configure the following settings:
Encoding Parameters
Main Stream (Normal): used for schedule recording;
Main Stream (Event): used for event recording;
Sub-Stream: used for network transmission.
Stream Type
Video and Video & Audio are selectable.
Resolution
Select the resolution for the selected camera and stream type. 1080p, 720p, WD1, and 4CIF are selectable.
Bitrate Type
Variable and Constant are selectable.
The video quality is configurable when you select Variable to the bitrate type; and the video quality is set as
Medium by default and cannot be edited when you select Constant to the bitrate type.
Video Quality
If you select Variable to the bitrate type, you can set the video quality as Highest, Higher, Medium, Low, Lower
and Lowest.
Frame Rate
Frame rate refers to the frequency of the image frame after compression. With other parameters constant, reduce
the video frame rate, and you can lower the maximum bitrate to some extent.
Max. Bitrate(Kbps)
Select the fixed value provided by the system or customize the maximum bitrate as desired.
4.
Click the
Set
button of
Schedule
to enter the record schedule interface.
1)
Check the check box of
Enable Schedule
to enable the record schedule settings.
2)
Select a day from the drop-down list for settings.
3)
Check the checkbox of
All-Day
to enable all-day recording, and then select the recording
Type
from the
drop-down list.
Or you can uncheck the checkbox of
All-Day
, customize the time period for recording, and select the recording
type for each time period.
4)
Click
OK
to save the new settings and exit.
You can view the recording status on the Record Status interface (Menu > Status > Record).
