manualshive.com logo in svg

HIKVISION DS-KH6320-WTE2, Руководство по настройке, Страница: 51 / 59

Поделиться
Скачать
HIKVISION DS-KH6320-WTE2 Скачать руководство пользователя страница 51

Figure 3-22 DNS Settings

Configure Mobile Client Connection

Configure Hik-Connect server parameters before viewing videos via mobile client.

Before You Start

Make sure the indoor station connects to the network.
Steps
1. Click Hik-Connect to enter the configuring the Hik-Connect settings page.
2. Enable Enable Hik-Connect.

Note

• To enable Hik-Connect service, you need to create a verification code or

change the verification code.

• The verification code should be 6 to 12 letters or numbers, case sensitive.

You are recommended to use a combination of no less than 8 letters or

numbers.

3. Enter the Verification Code and confirm the verificaton code.
4. Click OK.
5. Enable Custom and edit Service Address.
6. Enter the Verification Code.
7. Click Save to enable the settings.
8. Optional: Click Refresh to refresh the settings.

Group Network Settings

Click Group Network Settings to enter the group network settings page.

Video Intercom Indoor Station Configuration Guide

42

Содержание DS-KH6320-WTE2




























































Отзывы:

Нет отзывов