HIKVISION DS-KH6320-WTE2 Скачать руководство пользователя страница 43 | Manualshive

Страница: 43 / 59

HIKVISION DS-KH6320-WTE2 Скачать руководство пользователя страница 43

• When the zone type is set to be 24H Alarm, the indoor station will receive

alarm message when the detector is triggered no matter it is under arming

mode or disarming mode.

• When the zone type is set to be Delay Alarm, only under arming mode, the

indoor station will receive alarm message when the detector is triggered.

Under disarming mode, it will not receive alarm message when the detector

is triggered.

• After setting enter delay time, if OK is pressed within the enter delay time

after the alarm, the alarm event will not be uploaded to the management

center; if OK is not pressed within the enter delay time after the alarm, the

alarm event will be uploaded to the management center.

• The exit delay is the time between you enable the arming mode and the

arming takes effect.

IP Camera Information

You can add, delete and modify cameras that can be added to the video intercom

products, with two ways of getting stream: direct or URL. By exporting and importing

the added device information, you can edit added devices parameters in batch.

Add Camera

Steps
1. Click IP Camera Information to enter IP camera information page.

Figure 3-12 IP Camera Information

2. Click Add to pop up the device adding dialog box.
3. Enter corresponding information (device name, IP address, port No., user name,

password, etc.), and click OK.

Note

Indoor extension does not support this function.

Video Intercom Indoor Station Configuration Guide

34

«
...
41
42
43
44
45
...
»

Содержание DS-KH6320-WTE2




























































Отзывы:

Нет отзывов