HIKVISION DS-KH6320-WTE2 Скачать руководство пользователя страница 16 | Manualshive

Страница: 16 / 59

HIKVISION DS-KH6320-WTE2 Скачать руководство пользователя страница 16

3. Set the network parameters.

-

Enable DHCP, and the system can assign an IP address of the indoor station

automatically.

-

Disable the DHCP function, and set the IP address manually. You should set

the device IP address, the gateway, the DNS address.

2.3.2 Set Linked Device IP

Linked network parameters refers to the network parameters of devices (like door

station, doorphone, main station, center, etc.), to which the indoor station is linked.

Linked devices for the indoor station refers to door station, center, main station, and

doorphone.
With the private SIP protocol, intercom can be realized only when all these devices

are in the same network segment with the indoor station.
With the standard SIP protocol, intercom can be realized when all these devices

support the standard SIP protocol.
Steps

Note

• The doorphone does not support adding with the standard SIP protocol.
• Here take door station network settings as example.
1. Tap Settings → → Configuration , and enter admin (activation) password.
2. Tap to enter the device management page.
3. Tap Indoor Extension and select a connect indoor extension.
4. Tap Main Door Station to pop up the device information dialog.

Video Intercom Indoor Station Configuration Guide

7

«
...
14
15
16
17
18
...
»

Содержание DS-KH6320-WTE2




























































Отзывы:

Нет отзывов