manualshive.com logo in svg

HIKVISION DS-KH6320-WTE2, Руководство по настройке, Страница: 29 / 59

Поделиться
Скачать
HIKVISION DS-KH6320-WTE2 Скачать руководство пользователя страница 29

You can set and control the connected output devices via the output settings page.

You can change the relay' name, and open duration. You can also set to display the

relay button on the main page or not.
Steps
1. Tap Settings →   → Output Settings .

Note

• Supports up to 2 relays.
• If no relays displayed on the page, the device may not support the function.

2. Select a relay and set the parameters.

Name

You can change the relay's name.

Note

1 to 32 characters are allowed. Supports uppercase letters, lowercase letters,

numerics, and special characters.

Remain Open

Enable the function, the relay remains open.
Disabled the function, and you can set the remain open duration.

Note

• By default, the function is disabled.
• 1 to 180 s are available to set.

Hide on Main Page

Enable the function and the relay button will be displayed on the main page.

You can control the relay status manually on the main page.
Disabled the function and the relay button will no be displayed on the main

page.

Video Intercom Indoor Station Configuration Guide

20

Содержание DS-KH6320-WTE2




























































Отзывы:

Нет отзывов