HIKVISION DS-KH6320-WTE2 Скачать руководство пользователя страница 19 | Manualshive

Страница: 19 / 59

HIKVISION DS-KH6320-WTE2 Скачать руководство пользователя страница 19

1) Enable Enable Standard SIP.
2) Tap VOIP Account Settings and configure the account information, including

the user name, the phone number, the registered user name, the password,

the domain, the port No., and the expiration date.

Note

Up to 32 characters are allowed in the user name.

2.3.5 Add Camera

Steps
1. Tap Settings → → Configuration , and enter admin (activation) password.
2. Tap to enter the device management page.
3. Tap + to pop up the dialog box.
4. Select HIK Protocol and you can add the camera depended on the HIK protocol.
5. Enter the device name and IP address.
6. Enter the device user name and the password of the camera.
7. Exit the page to save the settings.

2.3.6 Zone and Alarm Settings

Zone Settings

You can set the zone type, alarm type and delay time and other parameters of 8

zones.

Before You Start
Tap Settings → → Shortcut Settings , and enable Alarm.
Steps

Note

Arming status page and zone settings page are hidden by default. You should enable

alarm function first.
1. Tap Settings → → Zone Settings to enter the zone settings page.

Video Intercom Indoor Station Configuration Guide

10

«
...
17
18
19
20
21
...
»

Содержание DS-KH6320-WTE2




























































Отзывы:

Нет отзывов