manualshive.com logo in svg

HIKVISION DS-KH6320-WTE2, Руководство по настройке, Страница: 20 / 59

Поделиться
Скачать
HIKVISION DS-KH6320-WTE2 Скачать руководство пользователя страница 20

Figure 2-9 Zone Settings

2. Press a zone to pop up the zone editing dialogue box.
3. Set the zone type, alarm type, status of arming status, entering delay, and exiting

delay.

4. Tap OK to save the settings.

Note

• 7 zone types are selectable: Panic Button, Door Magnetic, Smoke Detector,

Active Infrared, Passive Infrared, Gas Detector, and Doorbell.

• 3 alarm types are selectable: 24h Alarm, Instant Alarm, and Delay Alarm.

Set the alarm type as 24h alarm, and the zone will be armed for 24h.

Set the alarm type as instant alarm, and the zone will alarm once it's

triggered.

Set the alarm type as delay alarm, and you should set the entering delay

duration and exiting delay duration.

• Both the entering delay duration and the exiting delay duration are from 30s

to 60s.

• For Gas Detector and Smoke Detector, the alarm type is set as default 24h

alarm. The alarm type of them can not be changed.

Arming Mode Settings

4 arming modes can be configured: stay mode, away mode, sleeping mode and

custom mode.

Video Intercom Indoor Station Configuration Guide

11

Содержание DS-KH6320-WTE2




























































Отзывы:

Нет отзывов