manualshive.com logo in svg

HIKVISION DS-KAD1040, Руководство пользователя, Страница: 67 / 80

Поделиться
Скачать
HIKVISION DS-KAD1040 Скачать руководство пользователя страница 67

●

Default IP Address: 192.0.0.65.

●

Default Port No.: 8000.

●

Default User Name: admin.

Steps
1. Run the client software, click Maintenance and Management → Device

Management → Device to enter the page.

2. Click Online Device.
3. Select an inactivated device and click Activate.
4. Create a password, and confirm the password.

Note

We highly recommend you to create a strong password of your own choosing

(using a minimum of 8 characters, including at least three kinds of following

categories: upper case letters, lower case letters, numbers, and special characters)

in order to increase the security of your product. And we recommend you change

your password regularly, especially in the high security system, changing the

password monthly or weekly can better protect your product.

5. Click OK to activate the device.

Note

●

When the device is not activated, the basic operation and remote operation of

device cannot be performed.

●

You can hold the Ctrl or Shift key to select multiple devices in the online

devices, and click the Activate button to activate devices in batch.

5.3 Activate via SADP

SADP is a tool to detect, activate and modify the IP address of the device over the

LAN.

Before You Start

●

Get the SADP software from the supplied disk or the official website http://

www.hikvision.com/ , and install the SADP according to the prompts.

●

The device and the PC that runs the SADP tool should belong to the same subnet.

The following steps show how to activate one device and modify its IP address. For

batch activation and IP address modification, refer to User Manual of SADP for

details.

Video Intercom Two-Wire Bundle User Manual

56

Содержание DS-KAD1040

















































































Отзывы:

Нет отзывов