Figure 4-37 Placement of Lines
6. Connect the cables.
1) Connect the lines and module-connecting line 1 to the corresponding interfaces
of the main unit, then place the main unit into the upper grid.
2) Connect the other end of the module-connecting line 1 to the input interface of
the sub module. Connect two sub modules via module-connecting line 2.
3) Organize the cables with cable tie in the package. The suggested cable
connection picture as shown below.
Figure 4-38 Line Connection Effect Picture
7. Insert the modules into the frame after wiring. The main unit must be placed in
the top grid.
Video Intercom Two-Wire Bundle User Manual
34