HIKVISION DS-K2600-G Series, Руководство пользователя

Страница: 92 / 125

Access Controller
·
User Manual
83
2. You can editing the following parameters:
Door Magnetic : The Door Magnetic is in the status of Remain Closed (excluding special
conditions).
Exit Button Type : The Exit Button Type is in the status of Remain Open (excluding special
conditions).
Door Locked Time : After swiping the normal card and relay action, the timer for locking the
door starts working.
Door Open Duration by Card for Disabled Person: The door magnetic can be enabled with
appropriate delay after disabled person swipes the card.
Door Open Timeout Alarm : The alarm can be triggered if the door has not been close
Enable Locking Door when Door Closed : The door can be locked once it is closed even if the
Door Locked Time is not reached.
Duress Code : The door can open by inputting the duress code when there is duress. At the
same time, the client can report the duress event.
Super Password: The specific person can open the door by inputting the super password.
Dismiss Code: Input the dismiss code to stop the buzzer of the card reader.
Notes:

The duress code, Super password, and dismiss code should be different.

The duress code, super password, and the dismiss code should be different from the
authentication password.

The duress code, super password, and the dismiss code should contain 4 to 8 numerics.
3. Click Save button to save parameters.
Card Reader Parameters
Steps:
1. In the device list on the left, click to expand the door, select the card reader name and you
can edit the card reader parameters on the right.