Access Controller
·
User Manual
92
card according to the configured swiping card route. And only one person could pass the access
control point after swiping the card.
Click
Cross-Controller Anti-passing Back
to enter the Cross-Controller Anti-passing Back tab.
Setting Route Anti-passing Back
Purpose:
The route anti-passing back depends on the card swiping route. You should set the first card reader
and the card readers afterwards.
Steps:
1.
Check the
Enable Cross-Controller Anti-passing Back
checkbox to enable the function.
2.
Set the anti-passing back parameters.
Based on Card
Note:
The system will judge the anti-passing back according to the entrance and exit
records on the card.
1)
Select
Based on Card
as the anti-passing back mode in the drop-down list.
2)
Select Route Anti-passing Back
as the rule.
3)
Set the sector ID.
4)
Click
Select Device
to select a device in the pop-up window for anti-passing back
authentication.
5)
In the Set Card Reader area, click the icon on the left of the card enrollment station
column to select the first card reader. The icon will turn to
.
6)
Click the card reader afterward input field to select the card readers afterward in the
pop-up window.
7)
Check the checkbox in the Enable Anti-passing Back column to enable the anti-passing
back function.
Содержание DS-K2600-G Series
