HIKVISION DS-K2600-G Series Скачать руководство пользователя | Manualshive

Страница: 2 / 125

background image

Access Controller

·

User Manual

i

User Manual

© 2017 Hangzhou Hikvision Digital Technology Co., Ltd.
This manual is applied for access controller.

Product Name

Serials

Access

Controller

DS-K2601-G Serials Access Controller
DS-K2602-G Serials Access Controller
DS-K2604-G Serials Access Controller

It includes instructions on how to use the Product. The software embodied in the Product is
governed by the user license agreement covering that Product.

About this Manual

This  Manual  is  subject  to  domestic  and  international  copyright  protection.  Hangzhou  Hikvision
Digital Technology Co., Ltd. (“Hikvision”) reserves all rights to this manual. This manual cannot be
reproduced,  changed,  translated,  or  distributed,  partially  or  wholly,  by  any  means,  without  the
prior written permission of Hikvision.

Trademarks

and other Hikvision marks are the property of Hikvision and are registered

trademarks or the subject of applications for the same by Hikvision and/or its affiliates. Other
trademarks mentioned in this manual are the properties of their respective owners. No right of
license is given to use such trademarks without express permission.

Disclaimer

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, HIKVISION MAKES NO WARRANTIES,
EXPRESS  OR  IMPLIED,  INCLUDING  WITHOUT  LIMITATION  THE  IMPLIED  WARRANTIES  OF
MERCHANTABILITY  AND  FITNESS  FOR  A  PARTICULAR  PURPOSE,  REGARDING  THIS  MANUAL.
HIKVISION DOES NOT WARRANT, GUARANTEE, OR MAKE ANY REPRESENTATIONS REGARDING THE
USE  OF  THE  MANUAL,  OR  THE  CORRECTNESS,  ACCURACY,  OR  RELIABILITY  OF  INFORMATION
CONTAINED HEREIN. YOUR USE OF THIS MANUAL AND ANY RELIANCE ON THIS MANUAL SHALL BE
WHOLLY AT YOUR OWN RISK AND RESPONSIBILITY.
REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF PRODUCT SHALL BE WHOLLY
AT  YOUR  OWN  RISKS.  OUR  COMPANY  SHALL  NOT  TAKE  ANY  RESPONSIBILITIES  FOR  ABNORMAL
OPERATION,  PRIVACY  LEAKAGE  OR  OTHER  DAMAGES  RESULTING  FROM  CYBER  ATTACK,  HACKER
ATTACK,  VIRUS  INSPECTION,  OR  OTHER  INTERNET  SECURITY  RISKS;  HOWEVER,  OUR  COMPANY
WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED.
SURVEILLANCE  LAWS  VARY  BY  JURISDICTION.  PLEASE  CHECK  ALL  RELEVANT  LAWS  IN  YOUR
JURISDICTION  BEFORE  USING  THIS  PRODUCT  IN  ORDER  TO  ENSURE  THAT  YOUR USE  CONFORMS
THE APPLICABLE LAW. OUR COMPANY SHALL NOT BE LIABLE IN THE EVENT THAT THIS PRODUCT IS
USED WITH ILLEGITIMATE PURPOSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER
PREVAILS.

Support

Should you have any questions, please do not hesitate to contact your local dealer.

«
1
2
3
4
...
»

Содержание DS-K2600-G Series






























































































































Отзывы:

Нет отзывов

Похожие инструкции для DS-K2600-G Series

Бренд: Panasonic Страницы: 68

Бренд: Panasonic Страницы: 20

Бренд: Panasonic Страницы: 27

Бренд: Panasonic Страницы: 78

Бренд: Panasonic Страницы: 98

Бренд: NAiS Страницы: 173

Бренд: Panasonic Страницы: 2

Бренд: Abicor Binzel Страницы: 8

Бренд: Barthelme Страницы: 8

Бренд: Oceanic Страницы: 11

Бренд: Rain Bird Страницы: 138

Бренд: ZPA Pecky, a.s. Страницы: 36

Бренд: Tech 21 Страницы: 2

Бренд: HQ Power Страницы: 23

Бренд: LAB-EL Страницы: 25

Бренд: Cypress Страницы: 571

Бренд: Timotion Страницы: 9

Бренд: TECH Страницы: 20

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды