HIKVISION DS-2DE4425W-DE3, Руководство пользователя

Страница: 110 / 125

© Hikvision
Figure 6-42 Time Settings

Configuring Time Synchronization by NTP Server
Steps:
(1)
Check the radio button to enable the NTP function.
(2) Configure the following settings:
Server Address: IP address of NTP server.
NTP Port: Port of NTP server.
Interval: The time interval between the two synchronizing actions by NTP server. It can be
set from 1 to 10080 minutes.
Figure 6-43 Time Sync by NTP Server
You can click to make sure that the NTP server is connected.
If the camera is connected to a public network, you should use a NTP server that has a time
synchronization function, such as the server at the National Time Center (IP Address:
210.72.145.44). If the camera is set in a customized network, NTP software can be used to
establish a NTP server for time synchronization.

Configuring Time Synchronization Manually
Steps:
(1)
Check the Manual Time Sync radio button.
(2) Click to set the system time from the pop-up calendar.
(3) Click to save the settings.