Hikari HK2900, Инструкция по эксплуатации

Страница: 130 / 195

49
Parameter Function Setting range Initial value Remark
42. 0
Needle bar stop position is set.
0
：
up position
1
：
upper dead
point
0
Needle bar
rotates the
reverse
direction after
the up position
stop and stops
when upper
dead point stop
is set.
46. 0
Thread trimming can be disabled
at the end of sewing
0
：
Normal
1
：
thread
trimming
disabled
0
49.16 Bobbin winding speed can be set 800
～
2000 1600
201. ‐‐
Set whether or not the calling of
the pattern data is operative
0
：
calling
inoperative
1
：
calling
operative
Setting
depends on
the model
used
Patterns can be
individually set
P ‐ ‐ ‐ ‐ Pattern registration is carried out
C ‐ ‐ ‐ ‐
Cycle sewing registration is
carried out
[8]
Service parameter settings
Service parameter is different with normal parameter, it is forbidden for users to change usually,
needs o supply to the technicians when they adjust the machine.
1. Start and change service parameters
Press , display when LED light is off, then press
at the same time, when buzzer sound, can start and change service parameter.
Service parameter change is same as normal parameter, for details please refer to (2.6 user
parameter settings)
P1
P3 P5