Hikari HK2900, Инструкция по эксплуатации

Страница: 117 / 195

36
[6] OPERATION OF THE SEWING MACHINE (ADVANCED)
1. Performing sewing using the pattern keys ( )
Patterns (No.1 to 200) which have been already registered can be registered to P1 to P50. It is
possible to change and register the scale, max. speed limitation, thread tension and sewing
position. Same as the patterns (No.1 to 200), P1 to P50 are used by the selection by scrolling the
pattern Nos. The pattern calling from P1 to P25 can be made by one ‐ touch as well.
* When selecting P6 to P25, perform the selection by combination (simultaneous pressing) of ,
keys as shown in the table below.
P ‐ No. Selection key P ‐ No. Selection key P ‐ No
.
Selection key P ‐ No. Selection key
P1 P1 P8 P1+P4 P15 P4 +P5 P22 P2+P3+P4
P2 P2 P9 P1+P5 P16 P1+P2+P3 P23 P2+P3+P5
P3 P3 P10 P2+P3 P17 P1+P2+P4 P24 P2+P4+P5
1) While the sewing LED lights up, press
key to indicate the needle thread
tension .
2) Lower the presser with the foot
pedal.(
When the foot pedal is
depressed until it will go no
further, the sewing machine
starts. )
3) Move the feed with
,
key. 。
4) “c” is indicated at the position where the
tension setting is possible.
5) Pressing key, set the tension with
or key.
6) Repeat steps 3), 4) and 5) to set the
tension.
7) When setting is completed, press
key.The presser moves to the origin and
goes up.