Hikari HK2900, Инструкция по эксплуатации

Страница: 142 / 195

61
Panel display will show error code No.E220 after sewing for a certain time
。
This indicates
supplementary lubrication to be added to the specified position and must be add grease
，
call out
memory switch No.245
，
use reset button reset to
「
0
」 。
After appear error code No.E220, if the sewing continues, the No.E220 appear again, and the
error will not be solved by pressing the rest button, even the machine will not run
。
Therefore,
after appear error code No.E221
，
please add grease to the following position and after that
star ‐ up memory switch No.245
，
use reset button to resetting
「
0
」 。
Caution in order to prevent a human injury due to machine sudden movement,please
operation machine after turn Off power .
（
1
）
Add grease to eccentric cam
（
2
）
Add grease to big swing pin
1. After adding grease
，
change No.245(memory switch) to
「
0
」，
otherwise the error
codeNo.E220 or No.E221will appear again
。
2. In supplementary lubrication process
，
please use attached grease hose
（
no 40013640
） 。
If added unspecified grease will cause damage to the parts
。
1
）
Open upper cover
，
remove grease cover
⑥。
2
）
Remove eccentric cam
①
two side rubber cover
②，
then add grease
。
1
）
Put down machine
，
remove grease cover
⑦。
2
）
Remove big swing clutch
③
setscrew
④，
insert
install attach joint
⑤
grease hose to the
screw hole
，
then add grease
。
3
）
After add grease
，
please tighten up setscrew
④。
8. Supplementary lubrication to the specified position