Hikari HK2900, Инструкция по эксплуатации

Страница: 91 / 195

10
R M
No.1 2 3
X Y
1.2.3
…
P4 P3
P2 P1 P5
Indicate the state of the sensor:
0 or 1
Press this key to change the
state of X/Y sensor selection
Press the \ key to
make the X/Y motor to move in
the +/- direction step by step by
0.1mm once a time
Indicate the selection of X/Y sensor :
X scale enlarge or reduce LED
illuminated: X original sensor selected;
Y scale enlarge or reduce LED
illuminated: Y original sensor selected.
3. Manual X/Y Origin Adjustment
（
1
）
Set new origin: At first, press to have access to status of CP ‐ 2, the screen will
display “0” or “1” at this moment. Press again. Then step the pedal to search the
origin, lower the presser and activate the Sewing LED. When the Sewing LED is on, user can press
or to move the X/Y motor in +/ ‐ direction at 0.1mm as each step. After
setting the new origin, user can press to quit.
（
2
）
Return to Origin: At first, press to have access to status of CP ‐ 2, the screen will
display “0” or “1” at this moment. Press again to search origin, lower presser and
activate the sewing LED. When user steps the pedal to level 2, this operation will be performed
twice (The first time is to find the newly set origin, the second time tis to retreat to the system
origin.). When finishing the operation for Returning to Origin, user can press M to quit.