Highway Equipment Company NEW LEADER NL450C, Руководство пользователя

Страница: 21 / 102

NEW LEADER
HEADER
21
NL450C
Please Give Part No., Description
& Unit Serial No.
307306-B
Page Rev. A
INSTALLATION INSTRUCTIONS CONTINUED
Connect Implement
1. Check visible wear and make sure hitch and draw pin are clear of debris and dirt.
2. Raise hitch by turning the jack handle to extend the jack.
3. Pull out draw pin on tractor hitch. (Figure 1)
4. Back up tractor and align holes on implement hitch and hitch on tongue of implement. (Figure 2)
5. Insert draw pin through implement hitch and tractor drawbar. Insert hitch pin and lock to secure. (Figure 3)
6. Lower handle on draw pin into locking position. Insert securing pin through hole at bottom of draw pin and
lock. (Figure 4)
7. Lube implement hitch.
8. Retract jack to storage position.
Figure 1 Figure 2 Figure 3 Figure 4
9. Attach safety chain.
a. On left side of hitch, loop safety chain through tractor intermediate support. (Figure 5)
a. On left side of hitch, loop safety chain around tractor drawbar. (Figure 6)
b. Hook on chain. (Figure 7) Allow only adequate slack for articulation.
c. Slide clasp on safety chain to secure locked position. (Figure 8) Excess chain will hang between tractor and
implement. (Figure 9)
NOTE: Replace safety chain if one of more links are damaged, deformed or damaged.
Figure 5 Figure 6 Figure 7
OPER. & MAINT
.
INST
ALLA
TION