Highway Equipment Company NEW LEADER NL450C, Руководство пользователя

Страница: 15 / 102

15
307306-C
Page Rev. A
Please Give Part No., Description
& Unit Serial No.
NL450C NEW LEADER
HEADER
GENERAL SAFETY RULES
INSTALLATION SECTION
1. Follow connection instructions in the Installation
section of this manual. If mounting conditions
require deviation from these instructions refer to
factory.
2. When making the installation, be sure that the
lighting meets Federal Motor Vehicle Safety
Standard (FMVSS) No. 108, ASABE S279 and all
applicable local and state regulations.
3. Install controls so that they are located of
convenient use. Position them so that they do not
interfere with any vehicle control and that they
do not interfere with driver or passenger or with
access to or exit from the vehicle.
4. Check for vehicle visibility, especially toward the
rear. Reposition or add mirrors so that adequate
rearward visibility is maintained.
5. Add Caution, Warning, Danger and Instruction
decals as required. Peel off any label masking
which has not been removed.
6. Install all guards as required.
7. Check installation completely to be sure all
fasteners are secure and that nothing has been
left undone.
SAFETY