Highway Equipment Company NEW LEADER NL450C Скачать руководство пользователя страница 5

Страница: 5 / 102

NL450C

NEW LEADER

HEADER

307306-C

Page Rev. A

Please Give Part No., Description
& Unit Serial No.

PREFACE

PLEASE ! ALWAYS THINK SAFETY FIRST !!

The purpose of this manual is to familiarize the person (or persons) using this unit with the information necessary

to properly install, operate, and maintain this system. The safety instructions indicated by the safety alert symbol

in the following pages supersede the general safety rules. These instructions cannot replace the following: the

fundamental knowledge that must be possessed by the installer or operator, the knowledge of a qualified person,

or the clear thinking necessary to install and operate this equipment. Since the life of any machine depends largely

upon the care it is given, we suggest that this manual be read thoroughly and referred to frequently. If for any

reason you do not understand the instructions, please call your authorized dealer or our Product Sales and Support

Department at 1-888-363-8006 or 319-363-8281.

It has been our experience that by following these installation instructions, and by observing the operation of

the spreader, you will have sufficient understanding of the machine enabling you to troubleshoot and correct all

normal problems that you may encounter. Again, we urge you to call your authorized dealer or our Product Sales

and Support Department if you find the unit is not operating properly, or if you are having trouble with repairs,

installation, or removal of this unit.

We urge you to protect your investment by using genuine HECO parts and our authorized dealers for all work other

than routine care and adjustments.

Highway Equipment Company reserves the right to make alterations or modifications to this equipment at any

time. The manufacturer shall not be obligated to make such changes to machines already in the field.

This Safety Section should be read thoroughly and referred to frequently.

ACCIDENTS HURT !!!

ACCIDENTS COST !!!

ACCIDENTS CAN BE AVOIDED !!!

PREF

ACE

Содержание NEW LEADER NL450C







































































































Результаты поиска

Содержание NEW LEADER NL450C

Отзывы:

Похожие инструкции для NEW LEADER NL450C

Бренды по названию

Популярные бренды

Highway Equipment Company NEW LEADER NL450C, Руководство пользователя

Результаты поиска

Содержание NEW LEADER NL450C

Отзывы:

Похожие инструкции для NEW LEADER NL450C

Бренды по названию

Популярные бренды