Highway Equipment Company NEW LEADER NL450C, Руководство пользователя

Страница: 20 / 102

20
Please Give Part No., Description
& Unit Serial No.
307306-B
Page Rev. A
NL450C NEW LEADER
HEADER
NEW LEADER
INSTALLATION INSTRUCTIONS CONTINUED
IMPLEMENT PREPARATION AND CONNECTION
WARNING
Make sure area is clear between the tractor and implement when backing up to
implement.
WARNING
DO NOT wear loose clothing. Keep hands and other body parts away from connecting
parts of tractor and implement. Entanglement could cause serious injury.
WARNING
DO NOT stand on PTO, PTO driveline, tongue, or draw bar. Falling could cause death or
serious injury.
WARNING DO NOT use intermediate support as attaching point.
NOTICE! Make sure safety chain is stored safely when not in use.
NOTICE!
Inspect the cleanliness of connecting parts. All areas must be free of debris and dirt to ensure a
secure connection.
Adjust Implement Hitch
Factory installs implement hitch in lower two holes of hitch holder. Dealer/customer must adjust hitch position
to match tractor drawbar. Figure 1 shows correct hitch position for the JD 9430 and JD 8530.* When hitch is in
correct position, tighten grade 8 bolts to torque per “Standard Torques National Coarse (NC) Capscrews” chart in
this manual or 850-900 ft-lbs dry.
Figure 1
* Hitch position may be different if not using recommended John Deere tires.
OPER. & MAINT
.
INST
ALLA
TION