Highline New Equipment Limited Warranty Policy
One (1) Year / 12 Months - Parts and Labour
Highline Mfg. Ltd. (hereinafter "Highline") warrants this new product of Highline's manufacturer to be free from
defects in material and workmanship, under normal use and service for one (1) full year after initial purchase/retail
sale. Highline will warrant its product for one (1) year parts and labour, if performed by a qualified Dealer. This
Limited Warranty shall apply only to complete machines of Highline's manufacture. Parts are covered by a separate
Limited Warranty.
EQUIPMENT AND ACCESSORIES NOT OF HIGHLINE'S MANUFACTURE ARE WARRANTED ONLY TO THE
EXTENT OF THE ORIGINAL MANUFACTURER'S WARRANTY AND SUBJECT TO THEIR ALLOWANCE TO
HIGHLINE ONLY IF FOUND DEFECTIVE BY SUCH MANUFACTURER.
During the Limited Warranty period specified above, any defect in material or workmanship in any warranted item
of Highline Equipment not excluded below shall be repaired or replaced at Highline's option without charge by any
authorized independent Highline Dealer. An authorized Dealer must make the warranty repair or replacement.
Labour in accordance with Highline's labour reimbursement policy. Highline reserves the right to supply
remanufactured replacement parts as it deems appropriate.
RETAIL PURCHASER RESPONSIBILITY
This Limited Warranty requires proper maintenance and periodic inspections of the Equipment as indicated in the
Operator's Manual furnished with each new Equipment. The cost of routine or required maintenance and services
is the responsibility of the retail purchaser. The retail purchaser is required to keep documented evidence that these
services were performed. This Highline New Equipment Limited Warranty may be subject to cancellation if the above
requirements are not performed.
EXCLUSIONS AND LIMITATIONS
The warranties contained herein shall NOT APPLY TO:
1.
Any defect which was caused (in Highline's sole judgement) by other than normal use and service of the
Equipment, or by any of the following:
a.
accident
b.
misuse or negligence
c.
overloading
d.
of reasonable and proper maintenance
e.
improper repair or installation
f.
unsuitable storage
g.
non-Highline approved alteration or modification
h.
natural calamities
i.
vandalism
j.
parts or accessories installed on Equipment which were not manufactured or installed by Highline authorized
Dealers
k.
the elements
l.
collision or other accident.
2.
Any Equipment whose identification numbers or marks have been altered or removed.
3.
Any Equipment which any of the required or recommended periodic inspection or services have been performed
using parts not manufactured or supplied by Highline or meeting Highline Specifications including, but without
limitation, lubricants (oil, grease), belt lacings, and hydraulic fluids.
4.
Any Equipment used in demonstrations not performed by a Highline Dealer. Warranty will be at the discretion
of Highline for all other demonstration warranty.
5.
New Equipment delivered to the retail purchaser in which the warranty registration has not been completed and
returned to Highline within ten (10) days from the date of purchase.
6.
Any defect that was caused (in Highline's sole judgement) by operation of the Equipment not abiding by standard
operating procedures outlined in the Operator's Manual.
7.
Tire Limited Warranties and support are the responsibility of the respective product's manufacturer.
8.
Transportation costs, if any, of transporting to the Highline Dealer.
9.
In no event shall Highline's liability exceed the purchase price of the product.
10. Highline shall not be liable to any person under any circumstances for any incidental or consequential damages
(including but not limited to, loss of profits, out of service time and damage to equipment which this equipment
may be attached) occurring for any reason at any time.
11. Diagnostic and overtime labour premiums are not covered under this Limited Warranty Policy.
Rev 3.1
Содержание Bale Pro CFR650
