HighLine Bale Pro CFR650, Руководство оператора

Страница: 4 / 65

Table of Contents
Section 1 - Safety
Page
Serial number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Safety sign-off form . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Safety alert symbol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
General safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Safety decals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Safety decal locations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Section 2 - Transporting the CFR 650
Tractor Requirements . . . . . . . . . . . . . . . . . . . . . . . 2
Ensure the correct PTO speed. . . . . . . . . . . . . . . . . 2
Adjust the tractor drawbar length. . . . . . . . . . . . . . . 2
Lift the hitch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Connect the hitch to the tractor . . . . . . . . . . . . . . . 3
Connect the safety chain . . . . . . . . . . . . . . . . . . . . 4
Route the hydraulic hoses and wiring harness . . . . 4
Attach driveline to PTO . . . . . . . . . . . . . . . . . . . . . . 5
Attach hydraulics . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Connect the lights . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Place the hitch jack in the storage . . . . . . . . . . . . . . . . . 6
Adjust wheel stance settings . . . . . . . . . . . . . . . . . . . . . . 7
Check the condition of the tires . . . . . . . . . . . . . . . . . . . . 7
Raise the bale loading forks . . . . . . . . . . . . . . . . . . . . . . 8
Install the cylinder lock . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Raise the discharge deflector door . . . . . . . . . . . . . . . . . 8
Install the discharge deflector door transport lock . . . . . . 8
Ensure Slow Moving Vehicle (SMV) sign is clean . . . . . 9
Transport Speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Section 3 - CFR 650 Preparation
Park on level ground . . . . . . . . . . . . . . . . . . . . . . . . 1
Ensure that all decals are clean . . . . . . . . . . . . . . . 1
Ensure the SMV sign is clean and visible . . . . . . . . 1
Check the condition of the flail drum . . . . . . . . . . . . 1
Clean debris and material buildup . . . . . . . . . . . . . 1
Check the condition of the flails . . . . . . . . . . . . . . . . 2
Remove twine, netwrap wrapped on the flail drum . 2
Adjust the height of the hitch tongue . . . . . . . . . . . . 3
Set the level of the lower discharge deflector. . . . . . 3
Adjust the bale loader forks for the width of bale . . 4
Inspect all hydraulic motors, cylinders and hoses . . 5 Inspect the wheels and tires . . . . . . . . . . . . . . . . . . . . . . 5
Check that the axle u-bolts are tight . . . . . . . . . . . . . . . . 6
Remove twine built up around axle spindle and hub . . . . 6
Ensure the driveline shields are lowered . . . . . . . . . . . . 6
Remove the flail drum lock . . . . . . . . . . . . . . . . . . . . . . . 7
Remove the fork lock from the hydraulic cylinder . . . . . . 7
Remove lock pin on the discharge deflector door . . . . . 7
Remove the nut and washer from rubber deflector . . . . . 8
Lubricate all grease fittings and check the fluid level . . . 8
Netwrap or twine removal procedure . . . . . . . . . . . . . . . . 9
Section 4 - Operating the CFR 650
Unlock the flail drum . . . . . . . . . . . . . . . . . . . . . . . . 1
Set the aggression level of the flails . . . . . . . . . . . . 2
Set the speed of the feed rollers . . . . . . . . . . . . . . . 3
Set the upper deflector door . . . . . . . . . . . . . . . . . . 3
Set the lower deflector door . . . . . . . . . . . . . . . . . . 4
Load the bale into the processor tub . . . . . . . . . . . . 4
Load a second bale . . . . . . . . . . . . . . . . . . . . . . . . 5
Start the PTO to engage the flail drum . . . . . . . . . . 5 Begin processing material . . . . . . . . . . . . . . . . . . . . . . . . 6
Adjust the direction of bale rotation . . . . . . . . . . . . . . . . . 6
Re-adjust the discharge rate lever . . . . . . . . . . . . . . . . . 6
Re-adjust the level of the lower discharge deflector . . . . 7
Stop the feed rollers before loading another bale . . . . . 7
Crossing ditches and steep inclines . . . . . . . . . . . . . . . . 8
Making turns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Section 5 - Maintaining the CFR 650
Lubrication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Visually Inspect Hydraulic Hoses/Fittings . . . . . . . . 2
Check the Fluid Level in the Gearbox . . . . . . . . . . . 2
Gearbox Oil Changing Procedures . . . . . . . . . . . . . 3 Flail Replacement Procedure . . . . . . . . . . . . . . . . . . . . . 5
Tires . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Axles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6