High Valley 2500, Руководство пользователя, Страница: 13 / 28

13
M 2500 M F I
M C C M F I B
FLOOR PROTECTION:
UL 1618 Type 2 R = 0.45
"3/8" Asbestos Millboard or Equivalent" with k = 0.84
NOTE: Clearances to combus ble materials may
be reduced using shielding methods as described
in the current edi on of NFPA 211 Standard
for Chimneys, Fireplaces, Vents, and Solid Fuel
Burning Appliances. Any reduc on of clearances
must be approved by the local Authority Having
Jurisdic on.
Insert to Sidewall:
Insert to Mantel:
Insert to Mantel Trim:
24” (610mm)
18” (457mm)
11” (279mm)
Floor Protec on
Minimum 16" (406mm)
R = 0.45 ̴ k = 0.84
I F -C I I *
I D -C I I *
* NOTE: Installa on Illustra ons on Pages 12 & 13 are informa onal only.
The drawings are not to scale and are not intended to accurately depict con-
struc on techniques nor clearances to combus ble materials. Refer to the
latest edi on of NFPA 211 for current requirements.
F I I
The fi replace should be inspected before installing a wood burning
fi replace insert to con fi rm that the fi replace is structurally sound and
clearances to combus ble construc on meet all code requirements.
Using a cer
fi ed professional installer who has the specialized knowl-
edge and equipment needed for proper installa on is recommended.
• Have the fi replace fl ue cleaned before installa on as needed.
• Clean the fi replace of all ashes and debris before installa on.
• Clean creosote deposits from the fi replace chamber. Le -over cre-
osote deposits may produce an odor in the home.
• The fi replace damper plate must be removed or fi xed open.
○
Do not modify or damage the damper assembly to facilitate con-
nector installa on. Ovalized connector pipe is available to
fi t
through the damper opening and stainless steel damper adapter
kits are available to seal the damper opening.
○
Save the damper plate and all parts. If the insert is removed in
the future, the
fi replace can be returned to working order.
• Use only liner materials listed to appropriate UL standards and
carefully follow all instruc ons provided by the manufacturer.
F C
The recommended installa on method is to connect the fi replace in-
sert to a chimney liner from the insert fl ue to the top of the chimney.
This method ensures a warmer fl ue and con fi nes all by-products of
combus on within the fl ue liner, simplifying maintenance.
• The liner may be fl exible liner or rigid stainless steel pipe.
• The liner should be insulated for be er performance and safety.
• A full liner system should be blocked o
ff at or below the damper
and sealed against the weather at the top.
D C
The minimum installa on requires connec on from the insert fl ue,
through the damper and smoke chamber, and well into the fi rst chim-
ney le liner. Cleaning is more di ffi cult with this type of system.
• The damper opening must be sealed.
• An air- ght cleanout must be provided into the smoke chamber.
Use extreme care when moving the fi replace insert into posi on. It is
very heavy and can cause personal injury or property damage.
• Center the insert in the fi replace opening.
• The insert depth can be adjusted @ 3" to align the fl ue.
• If the fi replace is not level, or the fi replace fl oor is below the hearth,
leveling bolts (3/8"-16) of the appropriate length (not provided)
can be used to level the insert.
• Make good mechanical connec on of the liner to the insert and
maintain at least minimum clearances to combus ble materials.