High Lifter PGL-KIT-RZRT, Руководство пользователя, Страница: 19 / 34

PGL-KIT-RZRT 19
10. REPLACE & ROUTE FRONT BRAKE LINES
(PA) = Passenger Side (DR) = Driver Side
Here is what you will be doing in the following steps... Take the new extended length brake line and install it on
the (PA) side. Take the factory (PA) side brake line and install it on the (DR) side. Remove the original (DR) side
brake line and put it in a Zip-Loc bag and label it - (DR) side front. Put it where you can find it if needed
. (It will
not be reused during this installation).
a.
Disconnect both brake lines from the calipers and free the lines from any retaining clips or ties that hold
them in place on the upper control arms and frame.
b.
Find the master cylinder on the (DR) side. First, unplug the connector. Then disconnect the banjo bolt and
brake lines from the master cylinder. Make sure to save the washers from the factory that separate the two
front lines.