High Lifter PGL-KIT-RZRT, Руководство пользователя, Страница: 10 / 34

PGL-KIT-RZRT 10
3. FRONT BACKING PLATE ASSEMBLY AND INSTALL
a. Find the front right backing plate ( 82A-R ).
b.
Place a 1/8” front shim ( 82o ) to the upper backing plate and align it to the holes. This should set the
camber to ZERO once the assembled portal box is installed. The oval shape cut out should be to the top
right.
c.
Find the front right upper ball joint mount bracket ( 82B-R ). Place it on top of the shim and make sure all
the holes are aligned. The small cut out should be to the top right.
d.
Insert 7/16 x 2- 1/4” bolts through the upper mounting bracket and shim slots, and then out through the
front of backing plate. Slide (1) 7/16” washer onto each bolt and loosely fasten the bolts with 7/16” lock
nuts . (5/8)[70 ft lbs]
e.
Properly position and insert the lower ball joint into the lower ball joint mounting bracket on the backing
plate assembly.
a b c