DP450 Tap Water Iontophoresis System User Manual
Rev. 1.4 / 02-16-2017
22
3)
Take one cable (red OR black) and insert each end into a jack on the mod-
ule AFTER the device is in Programming Mode. This closes the circuit;
4)
The ACTIVE LED will light up if the device is working properly.
If the ACTIVE LED does not light under this test although the items on the
error checklist have been followed, please contact us or our distributor to
coordinate the required steps.
Shipping the Device for Repair or Maintenance
The device should only be shipped in the supplied carrying case. If possible, use
the original packaging material for shipping. Make sure the device is protected
against impact inside the case and that packaging is suitable for shipping.
Prior to shipping, do not forget to clean and dry the system and the acces-
sories. Please do not ship towels, axillary pads or any other pads.
Please send all electrical accessories (AC power adapter
➮
, electrodes
➴
, AX
electrodes
❒
and cable set
➬
) together with the HIDREX control unit.
Applicable Regulations and Legal Requirements
The regulations valid in the respective operator's country (e.g., infection preven-
tion, technical servicing or registration and documentation regulations) are to be
kept in connection with the location of use (e.g., medical institution), in any case,
by the operator.
Hint:
Individuals who only use the device privately usually do not have to
comply with special requirements.