Hi-Tech Solutions C5, Инструкция по установке и эксплуатации

Страница: 43 / 71

C5 Installation and Operation Guide Equipment Specifications Data sheets 41
Viewing and Changing Local Camera
Parameters
The local camera is the primary camera in a dual-camera installation.
In a single-camera installation, local camera refers to the single C5.
f
To view and change local camera parameters:
1. In the C5 Portal home page, click Configure .
The Configure page appears.
2. In the Local Camera section, view or change the settings, as described in the table
below.
Figure 26: Configure Page – Local Camera Parameters
Parameter Description
Enabled Select this option if there is a Local camera (primary camera).
Brightness Range: 0-255.
Default: 128.
Contrast Range: 0-127.
Default: 71.
Capture On
♦
Rising – Trigger on rising edge.
♦
Falling – Trigger on falling edge.
Illumination Set the number of images the camera will capture. Each image is
represented by its illumination level (0-3):
♦
0 – Off.
♦
1 – Low.
♦
2 – Medium.
♦
3 – High.
Up to 6 images separated by commas in any illumination order can be set. If
the field is empty, six images will be captured as follows: 3,3,2,2,1,1.