Hi-Tech Solutions C5, Инструкция по установке и эксплуатации

Страница: 41 / 71

C5 Installation and Operation Guide Viewing and Changing the C5 Configuration File 39
Chapter 8
Viewing and Changing the C5
Configuration File
The
C5.config
file is the C5 configuration file. You can edit the parameters in the file
using the C5 Portal. The changes take effect immediately after submitting them. Most of
the parameters are pre-limited to the correct range, but there are some “open” parameters
that should be configured only as described in this section.
Viewing and Changing General Parameters
f
To view and change general C5 parameters:
1. In the C5 Portal home page, click Configure .
The Configure page appears.
2. In the General section, view or change the settings, as described in the table below.
Figure 24: Configure Page – General Parameters
Parameter Description
ID The ID number of the lane.
This field is intended for multi C5 installation sites. In such
installations, assign a different ID to each C5 unit.
Name A free text field. Generally used to describe the C5 location.
Mode The mode of operation:
♦
Gate – Access Control with gate.
♦
Monitor – Report only.