04.24.2015
Mutant Hot Glue DIY assembly manual v1.05
PG7
HEXINVERTER ÉLECTRONIQUE, 2015
STEP_02: Power Header, Capa Purple LED
•
First, install one of the purple LEDs into its place on the MAIN PCB.
The longer leg is positive (+) and must
align to the ‘+’ marking on the PCB
•
Up next are the ceramic disc and film capacitors. These are the yellow and blue blobs, and the red box. They
can be installed in any direction
•
The power connector should be installed next, making sure that it is installed in the right orientation (as
shown)
•
The electrolytics can be installed now.
The negative (-) strip on the capacitors must be aligned with the
shaded (black) semicircle area on the PCB silkscreen
. Just like the LED, the positive (+) leg is the longest.
