04.24.2015
Mutant Hot Glue DIY assembly manual v1.05
PG17
HEXINVERTER ÉLECTRONIQUE, 2015
STEP_0D: Assemble the PCB Sandwich
•
It’s probably a good idea to give each PCB a final inspection for obvious errors before moving on!
•
Using the (8x) M3 screws and (4x) black nylon standoffs, it’s time to put the PCB sandwich together.
•
It is recommended to first mount the standoffs tightly onto the CONTROL PCB, and then you can place the
MAIN PCB on top of that and screw it in a little more gently.
This will make it easier should you have to
unscrew the MAIN PCB later – it should avoid accidentally loosening the CONTROL PCB’s screws from the
standoffs at the same time as the MAIN PCB’s screws.
