15
C.
Manuel mode
This mode allows the user to control the robot using the remote control. Connect the robot
to the control box then connect the control box to the mains supply, wait for the device to
initialize (LEDs flashing on the start buttons, see explanation in the automatic mode
section). You can then start by radio control.
If your robot is in automatic mode you can switch it to manual mode by pressing the STOP
button.
The robot can be CONTROLLED manually either:
•
with the radio control;
•
with a mobile phone on which you will have installed the corresponding application.
Use of radio control
The front can be identified by the logo on the hood of the vacuum cleaner. There are
different keys on your remote control:
-The “AUTO” button allows the robot to be launched in automatic immediate start.
-
The «STOP» button is used to completely immobilize the robot, ready to leave the
water or to switch it on automatic mode.
-
By pressing «AUTO» and «DELAY» buttons, you can not return to the remote control
without pressing first the button «STOP».
- The battery indicator lights up each time the button is pressed.
Remember to change your AA batteries regularly (every year).
- The “DELAY” button allows the robot to be launched in automatic delayed start.
The "360 °" button on the radio control corresponds to cleaning on the spot (one turn
in one direction then the other), thus making it possible to clean a very precise place,
where a suction mouth is stopped.
-
the "4 direction arrows" correspond to the orientation that you wish to give to the
robot, to move forward, backward or turn your robot, you must press one of the 4
arrows.
-
The “up” arrow corresponds to the forward movement of the robot.
-
the arrows "up" and "down" allow to select the normal or fast speed
-
the "right" and "left" arrows correspond to robot rotation: keep pressed as long as you
want to turn (be careful not to twist the cable).
IMPORTANT!
There are certain pools where the shape, the bottom of the pool
(e.g. central island, a high level of the bottom mouth ...) or
environmental data such as a temperature (e.g. water at 10°C ...) or
the chemical nature of water (e.g. very high level of salinity, a
permanent proliferation of algae ...) make it impossible to use your
robot SPOT PRO 100 in AUTOMATIC mode. You'll see this through a
very short daily program Please contact us for more details.
