9
B.
Electrical connections
For your safety and the correct operation of your SPOT PRO 100
follow the instructions
below:
•
Place the control box at least 3.5 metres from the edge of the pool, avoiding direct
exposure of the box to the sun or rain.
•
Connect the robot cable to the control box and lock the connector.
•
Connect the control box to a power outlet equipped with a ground terminal and
protected by a residual differential current protection device of up to 30 mA (if in
doubt, contact your installer electrician).
If you use an extension cord to connect your robot vacuum cleaner to the mains, make sure
the control box cannot be placed within 3.5 m of the pool edge.
WARNING !
Serious damage can be done to the robot if it is turned on while it is out
of the water!
