8
3.
How to install your SPOT PRO 100 ?
A.
Unpacking
Unpack the device with the necessary precautions. Do not use sharp tools (Cutter, ...).
Examine, in the presence of the driver or technician, the entire robot, cabinet... to detect
possible damage due to transport.
In case of damage, refuse delivery.
In case of doubt, if your device has been purchased:
•
directly from us, do not hesitate to make reservations on the transport voucher by
briefly describing the damage suffered. Only the recipient can file a complaint with
the carrier within 48 hours, and by registered letter. In addition, you must also notify
us within 48 hours otherwise we will not be able to do anything.
•
from a dealer, you should contact your dealer about the procedure to follow.
If your device is not in perfect condition or if it does not work, notify your dealer
immediately and do not try to turn it back on without the advice of a qualified technician
approved by our services.
We recommend that you keep the original packaging and materials, they will be used for
further transport under perfect conditions.
The packaging must contain the following elements:
•
the robot SPOT PRO 100 with its power cable;
•
Its trolley;
•
its control and power supply unit;
•
the remote control;
•
the technical manual.
In summary :
SPOT PRO 100 consists of following main elements (pictured below):
A cleaning unit
containing the suction pump, traction motors, filter retaining the
dirt and washable after use.
A control unit,
containing the electronic elements and the safety transformer, which
has to be kept min. 3.5 m far from the water (NFC15 / 100 standard). In the electronic unit,
in addition to the central robot’s system, there is also an internal memory of the robot
recording all the data necessary for the technician. SPOT PRO 100 was created in
accordance with the usual policy of its designers, namely the management of all
parameters to control the operations of the machine and modify them, if necessary.
A radio control
allowing the remote reading of all the functions and movements
executed by the cleaner and the selection of movement and programming functions.
A transport trolley
allowing you to move your device from its storage location to its
start-up location (the robot must not roll on the ground to reach the pool).
