14
Program launch
When choosing a program, press the appropriate button:
•
the cleaning start LED starts to flash
•
the LED of the selected program lights up steadily
The SPOT PRO 100 will begin to move, reach the opposite
side of the basin collecting the pool size data. The SPOT PRO
100 may not move in a straight line, this is not due to a failure
of the machine itself but to external stresses resulting from
the movement of the cable, turbulence in the pool water or
possible obstacles. The SPOT PRO 100 determines and
records the appropriate work schedule for pool cleaning and
performs this program during the predetermined working
period.
The use of the radio control is not possible during automatic
mode. By pressing the STOP button on the radio control to
stop the cleaning cycle, you will stop your robot. You can then use your SPOT PRO 100 in
MANUEL mode.
Program STOP
To stop your robot, either unplug it or press the button of
the current program. In this case then:
•
the cleaning monitoring diodes stopped
•
the selected program LED turns off
START / STOP function
The 3 program start keys allow you to stop the current
program at any time.
A new press on the program button will restart it at the
beginning of its cycle.
Climbing the walls
The function is set at the factory. A modification may be
possible during a factory revision of your device.
Or by intervention of a distributor having the access
allowing it.
NB :
he robot will stop climbing the walls when its filter is saturated (the
saturation detector lights up steadily). The filter must be cleaned (see
page 17) so that the robot can climb the walls again.
