Item
Description
Example
6
CAS latency
P = CAS 15-15-15
T = CAS 17-17-17
U = CAS 20-18-18
V = CAS 19-19-19 (for RDIMM, LRDIMM)
V = CAS 22-19-19 (for 3DS TSV LRDIMM)
Y = CAS 21-21-21 (for RDIMM, LRDIMM)
Y = CAS 24-21-21 (for 3DS TSV LRDIMM)
7
DIMM type
R = RDIMM (registered)
L = LRDIMM (load reduced)
E = Unbuffered ECC (UDIMM)
For more information about product features, specifications, options, configurations, and compatibility, see the
HPE DDR4 SmartMemory QuickSpecs on the Hewlett Packard Enterprise website (
Installing a DIMM
CAUTION:
To avoid damage to the hard drives, memory, and other system components, the air baffle
and drive blanks must be installed when the server is powered up.
CAUTION:
To avoid damage to the DIMM, insert it into the slot by pressing down gently on each side.
IMPORTANT:
The left and right sides of the chassis are oriented 180° from each other. Components
that are installed on one side of the chassis must be turned 180° when they are installed on the opposite
side.
Procedure
1.
on page 16).
2.
on page 17).
3.
Place the server on a flat, level work surface.
4.
on page 18).
5.
Open the front bracket (
on page 18).
6.
Remove the air baffle (
on page 21).
7.
Open the DIMM slot latches.
8.
Install the DIMM.
Hardware options installation
31
Содержание HPE ProLiant XL230k Gen10
Страница 10: ...Chassis server bay numbering Chassis I O module bay numbering 10 Component identification...
Страница 43: ...4 Install the riser cover 5 Install the riser into the I O module Hardware options installation 43...
Страница 58: ...Cabling Front panel LED board assembly cabling SATA drive cabling 58 Cabling...
