manualshive.com logo in svg

Hewlett Packard Enterprise HPE ProLiant XL230k Gen10, Руководство пользователя

Поделиться
Скачать
Hewlett Packard Enterprise HPE ProLiant XL230k Gen10 Скачать руководство пользователя страница 15

Powering up the chassis

Procedure

1.

Connect the AC or DC power cables, depending on the power configuration.

When the circuit breakers are powered, the chassis and the HPE Apollo Platform Manager have power. By
default, each installed component also powers up.

2.

Examine the APM for any errors which may prevent installed components from powering up.

Installing the operating system

To operate properly, the server must have a supported operating system installed. For the latest information
on operating system support, see the Hewlett Packard Enterprise website (

http://www.hpe.com/info/

supportos

).

IMPORTANT: 

HPE ProLiant XL servers do not support operating system installation with Intelligent

Provisioning, but they do support the maintenance features. For more information, see "Performing
Maintenance" in the 

HPE Intelligent Provisioning User Guide

 and online help.

To install an operating system on the server, use one of the following methods:

• Insert the operating system CD into the USB-attached DVD-ROM drive (user provided) and reboot the

server. Download the Service Pack for ProLiant from the SPP download site (

http://www.hpe.com/

servers/spp/download

) and create SPP media to install the drivers.

• Remote deployment installation — Use PXE boot into a server and deploy an operating system with a host

server.

For additional system software and firmware updates, download the Service Pack for ProLiant from the
Hewlett Packard Enterprise website (

http://www.hpe.com/servers/spp/download

). Software and firmware

must be updated before using the node for the first time, unless any installed software or components require
an older version.

For more information on using these installation methods, see the Hewlett Packard Enterprise website (

http://

www.hpe.com/info/ilo

).

Registering the server

To experience quicker service and more efficient support, register the product at the 

Hewlett Packard

Enterprise Product Registration website

.

Setup

15

Содержание HPE ProLiant XL230k Gen10



















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды