-
18
-
2.3.1
Connection Box Interfaces
Figure 2.8 Connection Box (Front)
Port #
Port Name
Description
a
Standard Ethernet Port
RJ45, 1000 Mbps Ethernet
b
Power Port
Use DC-005 DC power adapter
External power supply: 9 to 48 V, 27 W
c
GPS Port
Connector
part number
: JST, SM06B-SRSS-TB
Recommended connector for the external GPS module: JST, SHR-06V-S-B
Voltage standard: RS232 Baud rate: 9600 bps
The GPS port pin numbers are 1 to 6 from left to right, defined as follows:
Pin #
Direction
Pin Description
Requirements
1
Input
PPS (pulse-per-second) signal for synchronization
TTL level 3.3 V/5 V
Recommended pulse width: ≥1 ms
Cycle: 1 s (from rising edge to rising edge)
2
Output
Power for the external GPS module
5 V
3
Output
Ground for the external GPS module
-
4
Input
Receiving serial data from the external GPS module
RS232 level
5
Output
Ground for the external GPS module
-
6
-
Reserved
-
Содержание Pandar128
