37
HMD8 DSP/
USER’S MANUAL
6.4.11.3
Memory delay
The selected memory allows this further customization for the output channels delays.
Remark:
this function is applied to the output channels only when the memory is selected.
Remark:
this function is enabled only if a check mark is placed in the related check box on the top tab!
The memory delays function provides the ability to enter the delay value in milliseconds for each output channel:
these delays replace those set in the delay panel or those calculated by the automatic delay calculation command
(according to the speakers position).
When the memory is deselected (or the memory delay function is disabled by removing the check mark), the delays
are restored to the original values set for each output channel.
Delays checkbox:
allows you to enable or disable this additional feature of the selected memory.
Reset button:
restore all the delays of the selected memory to 0 ms.
Help:
to open the user guide.
1
3
2
1
2
3
6
