Hertz Marine HMD8 DSP, Руководство пользователя

Страница: 13 / 46

13
HMD8 DSP/
USER’S MANUAL
1. HMD8 DSP provides 8 amplified outputs. Through the PC Software, each output channel is provided with the
following
(see sec. 6.4.4)
:
- the dedicated audio channel send of the mixer
(see sec. 6.4.7)
;
- a digital time delay line and distance setting
(see sec. 6.4.8)
;
- an electronic crossover with 5 filter types and phase inversion activation
(see sec. 6.4.9)
;
- a 10 pole graphic/parametric equalizer
(see sec. 6.4.10)
;
In addition each output channel can:
- be assigned to a listening zone
(see sec. 6.4.6)
- belong to one or more groups
(see sec. 6.4.5)
2. HMD8 DSP features a preamplified output (4 V Rms max.) SUB OUT that exclusively controls a mono amplifier for subwoofer,
or one active subwoofer to amplify the sound system. This output corresponds to “OUT 9” PC Software graphic interface.
CH 1 ÷ CH 8 AMPLIFIED OUTPUT CHANNELS CONFIGURATION
HMD8 DSP
0 1
2
3
4
5
6
7
USB
PRESETS
OPTICAL IN
SUB OUT CTRL SPEAKER IN PRE IN
DRC
UPGRADE
OFF ON
SPEAKER OUT
FUSE x 2
POWER
HMD1
16: White OUT 1+
15: White OUT 2+
14: White OUT 3+
13: White OUT 4+
12: White OUT 5+
11: White OUT 6+
10: White OUT 7+
9: White OUT 8+
8: White/Black OUT 1-
7: White/Black OUT 2-
6: White/Black OUT 3-
5: White/Black OUT 4-
4: White/Black OUT 5-
3: White/Black OUT 6-
2: White/Black OUT 7-
1: White/Black OUT 8-
2
1
POWER CHANNEL CONFIG
STEREO MODE BRIDGE MODE
CH1 85 W @ 4 Ohm / 130 W @ 2 Ohm
CH2 85 W @ 4 Ohm / 130 W @ 2 Ohm
CH1+ / CH2 - 260 W @ 4 Ohm
CH3 85 W @ 4 Ohm / 130 W @ 2 Ohm
CH4 85 W @ 4 Ohm / 130 W @ 2 Ohm
CH3+ / CH4 - 260 W @ 4 Ohm
CH5 85 W @ 4 Ohm / 130 W @ 2 Ohm
CH6 85 W @ 4 Ohm / 130 W @ 2 Ohm
CH5+ / CH6 - 260 W @ 4 Ohm
CH7 85 W @ 4 Ohm / 130 W @ 2 Ohm
CH8 85 W @ 4 Ohm / 130 W @ 2 Ohm
CH7+ / CH8 - 260 W @ 4 Ohm
5
5.5 OUTPUT SIGNALS