15
HMD8 DSP/
USER’S MANUAL
6. CONFIGURATION SOFTWARE
This section describes the main features of the configuration software: Navigator.
The software was designed to be adopted by all products with onboard DSP in the Hertz marine catalog and future
ones: when you connect the device to the software, it automatically configures itself to display the interface of that
specific device connected.
Navigator can also be used without a real physical device, as it provides a series of virtual devices that fully reflect the
respective real counterparts.
When you start the software, an initial screen appears, listing all the devices you can connect to it.
You can see an example in the image below:
real DEVICE connected to the PC:
the software detected an HMD8 DSP device connected via USB to the PC;
virtual DEVICE:
it is a virtual model of a real device;
refresh button:
update all the lists.
Once the device has been selected, the software communicates with it and displays the current configuration.
6
6.1
LINK TO DEVICE
Remark:
the device must be switched on and connected to the PC so that it can appear in the list of the
available devices.
1
1
2
2
3
3
