19
HMD8 DSP/
USER’S MANUAL
The memories act on all the output channels and serve to give a particular nuance setting to the system.
Unlike the previous settings which are an essential and fixed part of the setup, the memory can be activated or
deactivated by the end user while listening.
6.4.1.8
MEMORIES CONFIGURATION
6.4.2
SOURCES
The Sources represent the devices from which to reproduce audio signals and which can be connected to the
amplifier. Based on the technical specifications, an amplifier can be connected to one or more sources. Source
selection is possible using the configuration software.
The sources can be:
• renamed;
• disabled / enabled.
By selecting the copy destination checkbox and confirming, the
following fields will be copied for all the output channels from the
current source to the checked one:
• crossover;
• equalizer;
• delay (both the delay in milliseconds and the delay correction in samples).
Selection button:
select the source.
Sources settings panel:
access the sources settings panel.
Copy panel:
access the source copy panel.
Help:
to open the user guide.
2 3 4
1
1
2
3
4
Remark:
there is always a source selected. It is not possible to deselect all the sources.
Remark:
it is not possible to select multiple sources at the same time.
Remark:
each source has its own number of input channels.
Remark:
not all sources can be disabled: the master source is always enabled.
•
SOURCES SETTINGS PANEL
The image below shows the settings panel for the sources.
•
COPY PANEL
The image below shows the settings panel for the sources.
6
