Hertz Marine HMD8 DSP, Руководство пользователя

Страница: 16 / 46

16
HMD8 DSP/
USER’S MANUAL
OPEN
Load configuration from a file saved on the PC.
SAVE
Save the current configuration to a file on the PC.
SAVE AS
Save a named copy of the current configuration to a file on the PC.
FINALIZE
Writes the current status of the device to memory, the current configuration becomes permanent and is retained
after power down.
DEVICE RESET TO FACTORY DEFAULT
Clear the device memory containing the user settings; it returns to the default condition. Presets are not cleared.
AUDIO SETTINGS
access the audio settings panel. See Real time analysis
(see sec. 6.5.3)
.
SETTINGS
access the general settings panel of the configuration software.
HELP
to open the user guide.
INFO
access the panel containing information about the software.
6.2 SAVE AND LOAD THE CONFIGURATION
6.3 SETTINGS
1
1
1
2
2
2
3 4
3
3
4
4
5
1 2 3 4 5
The software provides the ability to save the current configuration to a file, upload one already saved on your PC
and other important features.
These are available on the top command bar, as shown in the image below.
The software provides the ability to change general settings. The icons for general settings are available on the top
right command bar, as shown in the image below.
Remark:
in the default condition, the device does not reproduce any sound in the output channels: this is because
the audio mixer (the routing of the inputs to the outputs) has a zero value for all the sends.
6